Astra pcf7941 how to read with pcfprog

[carnostics]

hi, I am only new to this programmer pcfprog. I would like to read key info.

my settings are erom 8192 eeprom 1024 boot 41/61.

bottom right hand corner I am getting boot fail.

can someone please help me and tell me what i am doing wrong.

[Girts]

possible causes -
1) wrong connection (take attention on yellow and green wires! In some 3rd party manuals yellow is green and green is yellow for PCFprog,
2) wrong chip type - go to menu, boot -> choose correct one
3) battery is removed from key?
4) some chips like PCF7941 need a very little power, so sometimes EMI field around PC is enough to power them on. Solution - try to short coil, place 10k...100k resistor on power wires etc...

[skematix]

boot fail = no connection or wrong connection

boot failed = device cannot boot board (such as 41 from IYZC01C)

[solitaire]

PCB photo with connection please