Ford Mondeo SID 206

[Canfan]

Hello I have test the emulator. https://cartools.lv/Shop/product_info.p ... cts_id=206
The problem I can´t get the ECU authorized.
I have found the sync ED360AB2D4341EC3 but it don´t work.
I habe ask a Ford technikan he says me in that car the immo is in the BCU and ABS stored the own sync in the engine contraol unit.
https://cartools.lv/Shop/product_info.p ... cts_id=206

WinRAR-Archiv (neu).rar

[Girts]

Change ABS_ID in ECU eeprom to actual one (ascii 529115 in your dump now).
Or if testing on the bench, transmit periodically CAN ID 260 with actual data.
example: 260 (8) 48 E0 37 34 30 39 39 31 -> ABS_ID 740991
Last 6 necessary, not full as shown by diagnostic tool.

[Frolov]

and calculate 2 bytes of checksum?

[Canfan]

I have write the sync code in the emulator and symulate the ABS the the engine will run a short time than i get the fault U0300 Internal Configuration incorrect is a fault from the BCU

[Canfan]

The emulator works well by S-Max and Galaxy from 2006 too.

[Canfan]

The emulator works well by DCM3.5 from a Mondeo, S-Max and Galaxy